Top 20 Best Xdm Mods Reviews & Guide

Top 20 Best Xdm Mods List, Reviews & Guides Below

1
IWB Inside Waistband Holster for Concealed Carry, Fits: XD MOD.2 3″ 3.3″ SUB Compact Model 9mm .40sw .45ACP / XD 3″ / Xdm 3.8″ Compact / XDS 3.3″/ XDE 3.3″ or Similar Sized Pistols
IWB Inside Waistband Holster for Concealed Carry, Fits: XD MOD.2 3″ 3.3″ SUB Compact Model 9mm...
9.6
2
Ade Advanced Optics Red Dot Adapter/Mounting Plate for Springfield XD, XDE, XD MOD.2, XD(M), XDM, XDS Pistol
Recommended
Ade Advanced Optics Red Dot Adapter/Mounting Plate for Springfield XD, XDE, XD MOD.2, XD(M), XDM,...
9.5
3
Q-SERIES Minimalist Concealed Carry Holster Compatible with Springfield Armory XD. XD Mod 2, XDM Models. Not Compatible with The XDS or XDE Models
Q-SERIES Minimalist Concealed Carry Holster Compatible with Springfield Armory XD. XD Mod 2, XDM...
9.1
4
XDM Gun - Mod Sound Similation 2021
XDM Gun - Mod Sound Similation 2021
9.1
5
Ade Advanced Optics Huracan RD3-006x Green Dot Reflex Sight + Optic Mounting Plate for Springfield XD, MOD.2,XDm,XDS,XDE, Hellcat(Non-OSP) Pistol
Ade Advanced Optics Huracan RD3-006x Green Dot Reflex Sight + Optic Mounting Plate for...
8.5
6
Ade Advanced Optics Pistol Red Dot Sight Mount Base Plate/Adapter for Springfield XDE, XD, XDM, XD MOD.2, XD(M), Hellcat (Non-OSP) Handgun
Ade Advanced Optics Pistol Red Dot Sight Mount Base Plate/Adapter for Springfield XDE, XD, XDM,...
8.4
7
Crimson Trace DS-123 Defender Series Accu-Guard Red Laser Sight for Springfield Armory XD, XD MOD.2 and XD(M) Pistols , Black
Crimson Trace DS-123 Defender Series Accu-Guard Red Laser Sight for Springfield Armory XD, XD...
8.1
8
Hilljak Magazine Speed Loader Designed to fit Sig Sauer P250 P320; Springfield XD, XDM, XD Mod 2; Ruger American; FN 509, FNS-9; HK VP9, P30 9mm Double-Stack Magazines Red Stripe
Hilljak Magazine Speed Loader Designed to fit Sig Sauer P250 P320; Springfield XD, XDM, XD Mod 2;...
8.1
9
Trigger Sheath Trigger Guard Holster Black with Paracord (Springfield XD XDM & MOD 2)
Trigger Sheath Trigger Guard Holster Black with Paracord (Springfield XD XDM & MOD 2)
8.1
10
Ade Advanced Optics Crusader RD3-009 Red Dot Reflex Sight + Optic Mounting Plate for Springfield XD, MOD.2,XDm,XDS,XDE, Hellcat(Non-OSP) Pistol
Ade Advanced Optics Crusader RD3-009 Red Dot Reflex Sight + Optic Mounting Plate for Springfield...
8.1
11
Ade Advanced Optics Delta RD3-012 Red Dot Reflex Sight + Optic Mounting Plate for Springfield XD, MOD.2,XDm,XDS,XDE, Hellcat(Non-OSP) Pistol
Ade Advanced Optics Delta RD3-012 Red Dot Reflex Sight + Optic Mounting Plate for Springfield XD,...
7.9
12
LASERPRO+ARMALASER Laser Kit for Springfield XD, XD Mod.2, XD-M, XD-M Elite (Compact Sizes - NOT XD-S or XD-E) w/Holster, Touch-Activated ArmaLaser TR35-G Green Laser & 2 Extra Batteries
LASERPRO+ARMALASER Laser Kit for Springfield XD, XD Mod.2, XD-M, XD-M Elite (Compact Sizes - NOT...
7.7
13
Ade Advanced Optics Bertrillium RD3-013 Red Dot Reflex Sight + Optic Mounting Plate for Springfield XD, MOD.2,XDm,XDS,XDE, Hellcat(Non-OSP) Pistol
Ade Advanced Optics Bertrillium RD3-013 Red Dot Reflex Sight + Optic Mounting Plate for...
7.6
14
Techna Clip – Springfield Armory MOD.2 or XD(M) .9MM .40 .45 - Conceal Carry Belt Clip (Right-Side)
Techna Clip – Springfield Armory MOD.2 or XD(M) .9MM .40 .45 - Conceal Carry Belt Clip (Right-Side)
7.3
15
HQDA Double Magazine Holster, 9mm .40 Double Magazine Pouch Fits Glock 17 19 23 43 Duty Belt OWB Double Stack Mag. Holder for Taurus CZ S&W Sig Sauer Beretta H&K Colt Browning Ruger CANIK
HQDA Double Magazine Holster, 9mm .40 Double Magazine Pouch Fits Glock 17 19 23 43 Duty Belt OWB...
7

Top 40 Best Xdm Mods Features

IWB Inside Waistband Holster for Concealed Carry, Fits: XD MOD.2 3″ 3.3″ SUB...

IWB Inside Waistband Holster for Concealed Carry, Fits: XD MOD.2 3″ 3.3″ SUB Compact Model 9mm .40sw .45ACP / XD 3″ / Xdm 3.8″ Compact / XDS 3.3″/ XDE 3.3″ or Similar Sized Pistols

Features

  • ➤ Features: inside the waistband for concealed carry.
  • ➤ Fits: XD MOD.2 3″ 3.3″ SUB COMPACT MODEL 9mm .40sw .45ACP / XD 3″ / Xdm 3.8″ compact and full size / XDS 3.3″ SINGLE STACK / XDE 3.3″ & All Similar Guns.
  • ➤ IWB holster case uses high quality cowhide, Material thickness ≥ 0.1 inches,Handmade Solid,The holster opening is double reinforced。Double sutures are used at the front and rear ends of the suture, so there is no need to worry about suture breakage.and the hardness is moderate, It does not need to be used for a long time to form the shape of the pistol. Comfortable and durable.
  • ➤ Holster Clip width: 2.0 inches, A Belt of 1.8 inches or Less is Suitable.
  • ➤ After-sales service:100% Satisfaction Guarantee, No questions asked return policy and Lifetime Warranty.Logistics: Shipped from the US, time: 2-6 days.

Ade Advanced Optics Red Dot Adapter/Mounting Plate for Springfield XD, XDE, XD...

Ade Advanced Optics Red Dot Adapter/Mounting Plate for Springfield XD, XDE, XD MOD.2, XD(M), XDM, XDS Pistol

Features

  • New design in 2020. This brand new designed optic mounting plate is to REPLACE the rear sight of pistol. Specially made to fit Springfield XD, XD MOD.2, XD(M), XDS Pistol. (Does not fit 5.25″ XDM competition series)
  • It is design to for Springfield Non-OSP(Non Optics Ready) XD/XDS/XDM pistols that do NOT has a Optic Cut. This plate is for replacing rear sight. It also fits Non-OSP Hellcat. It does NOT fit 5.25″ XDM competition series. This new plate is an re-designed version to replace the old E1/E2 plate for Springfield xd that always need modification caused by incorrect dovetail size.
  • Fit Ade RD3-006A(Huracan), RD3-006B(Cobra), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot.
  • There are two parts of this plate. This Small Dovetail Insert plate basically replaces the rear sight using two jam screws. The big plate uses two silver alignment pins at 2 of the 4 corner holes for the optic to sit in.
  • Hiring a gunsmith is highly recommended, Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for instsallation. Including two align pins to attach to any of the four corner holes to prevent any movement.

Q-SERIES Minimalist Concealed Carry Holster Compatible with Springfield Armory XD....

Q-SERIES Minimalist Concealed Carry Holster Compatible with Springfield Armory XD. XD Mod 2, XDM Models. Not Compatible with The XDS or XDE Models

Features

  • COMPATIBLE MODELS - This holster is designed specifically for your Springfield Armory XD. XD Mod 2, XDM models. It does not fit XDS or XDE models. Please make sure to purchase the right holster for your model as it won't fit other models.
  • BREAK-IN PERIOD - These holsters are like a pair of new shoes. They are sturdy and fit well, but we suggest you use them for a couple of days so they can adjust to your gun. You will see that they start fitting great with time.
  • INJECTION MOLDED VS KYDEX - Q-Series holsters are injection molded. They are both strong and durable, but Kydex tends to deform with heat, while injection-molded polymer construction is lightweight and guarantees a perfect fit every time.
  • THE ONLY MINIMALIST HOLSTER WITH FULL-SIZE FEATURES - Snaps firmly over the trigger guard, providing positive retention while completely covering the trigger for a safe and reliable conceal carry
  • LOW-PROFILE & TUCKABLE - Extremely low-profile tuckable design sits close to the body and virtually eliminates printing, the ultimate option for all IWB and appendix carry.

XDM Gun - Mod Sound Similation 2021

XDM Gun - Mod Sound Similation 2021

Features

  • This is a virtual 2D XDM gun.
  • You can shoot with your virtual XDM gun.
  • You can hear the realistic gun sound when you shoot with your virtual xdm gun.
  • Using this virtual weapon is quite simple and easy.

Ade Advanced Optics Huracan RD3-006x Green Dot Reflex Sight + Optic Mounting Plate...

Ade Advanced Optics Huracan RD3-006x Green Dot Reflex Sight + Optic Mounting Plate for Springfield XD, MOD.2,XDm,XDS,XDE, Hellcat(Non-OSP) Pistol

Features

  • Comes with a Picaitnny mount. Also comes with ADE all new designed adapter mount for Springfield XD, XDE 3.8XD MOD.2, XD3.3"/3.8" Single Stack, XD(M), Hellcat (Non-OSP) Pistol. (It does NOT fit 5.25″ XDM competition series, it does NOT fit any OSP optics ready models)
  • While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
  • Huracan RD3-006 Green Dot Reflex Sight. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side.
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture
  • 3 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included)

Ade Advanced Optics Pistol Red Dot Sight Mount Base Plate/Adapter for Springfield...

Ade Advanced Optics Pistol Red Dot Sight Mount Base Plate/Adapter for Springfield XDE, XD, XDM, XD MOD.2, XD(M), Hellcat (Non-OSP) Handgun

Features

  • Released in May 2020. This brand new designed optic mounting plate is to REPLACE the rear sight of pistol. Specially made to fit Springfield XD, XD MOD.2, XD(M), XDS Pistol. (Does not fit 5.25″ XDM competition series)
  • It is design to for Springfield Non-OSP(Non Optics Ready) XD/XDS/XDM pistols that do NOT has a Optic Cut. This plate is for replacing rear sight. It also fits Non-OSP Hellcat. It does NOT fit 5.25″ XDM competition series. This new plate is an re-designed version to replace the old E1/E2 plate for Springfield xd that always need modification caused by incorrect dovetail size.
  • Fit Ade RD3-006A(Huracan), RD3-006B(Cobra), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot.
  • There are two parts of this plate. This Small Dovetail Insert plate basically replaces the rear sight using two jam screws. The big plate uses two silver alignment pins at 2 of the 4 corner holes for the optic to sit in.
  • Hiring a gunsmith is highly recommended, Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury. Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for instsallation. Including two align pins to attach to any of the four corner holes to prevent any movement.

Crimson Trace DS-123 Defender Series Accu-Guard Red Laser Sight for Springfield...

Crimson Trace DS-123 Defender Series Accu-Guard Red Laser Sight for Springfield Armory XD, XD MOD.2 and XD(M) Pistols , Black

Features

  • BRIGHTNESS: Features a 5mW peak, 620-670nm, Class 3R visible red laser - the brightest beam allowed by law
  • EASE OF USE: N-GAGE Activation ambidextrous Tap-On / Tap-Off Push Button Controls for immediate laser activation from either side of the unit
  • RUNTIME: Over 2 hours of battery life powered by (1) 1/3N battery (included)
  • RELIABLE: User installed- No gunsmithing required - Factory sighted at 50 feet, but is fully user adjustable for Windage and Elevation with provided tool
  • FITS: Springfield Armory XD, XD MOD.2 and XD(M) pistols with modern accessory rail - Does not fit HS2000 or early Croatian XD Models with single rail notch

Hilljak Magazine Speed Loader Designed to fit Sig Sauer P250 P320; Springfield XD,...

Hilljak Magazine Speed Loader Designed to fit Sig Sauer P250 P320; Springfield XD, XDM, XD Mod 2; Ruger American; FN 509, FNS-9; HK VP9, P30 9mm Double-Stack Magazines Red Stripe

Features

  • Designed and Made in USA of 3D printed polymer plastic
  • Ergonomic form factor provides superior comfort, speed and design!
  • Used by competition shooters; great for experienced and first time shooters
  • Saves your fingers from the pain of loading. Get Loaded Quicker!
  • Buy American!

Trigger Sheath Trigger Guard Holster Black with Paracord (Springfield XD XDM & MOD 2)

Trigger Sheath Trigger Guard Holster Black with Paracord (Springfield XD XDM & MOD 2)

Features

  • Prevent Accidental Discharge When Carrying Pistol
  • Includes High Quality Trigger Guard and Paracord
  • Safely Carry On Body or In Bag and Purse
  • Anchor To Secure Object or Pull on Paracord to Easily Remove Guard
  • Made in America

Ade Advanced Optics Crusader RD3-009 Red Dot Reflex Sight + Optic Mounting Plate...

Ade Advanced Optics Crusader RD3-009 Red Dot Reflex Sight + Optic Mounting Plate for Springfield XD, MOD.2,XDm,XDS,XDE, Hellcat(Non-OSP) Pistol

Features

  • Comes with a Picaitnny mount. Also comes with ADE all new designed adapter mount for Springfield XD, XDE 3.8XD MOD.2, XD3.3"/3.8" Single Stack, XD(M), Hellcat (Non-OSP) Pistol. (It does NOT fit 5.25″ XDM competition series, it does NOT fit any OSP optics ready models)
  • While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
  • Crusader RD3-009 Red Dot. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture.
  • Fully windage and elevation adjustable and lockable; Unlimited Eye Relief
  • 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included)

Ade Advanced Optics Delta RD3-012 Red Dot Reflex Sight + Optic Mounting Plate for...

Ade Advanced Optics Delta RD3-012 Red Dot Reflex Sight + Optic Mounting Plate for Springfield XD, MOD.2,XDm,XDS,XDE, Hellcat(Non-OSP) Pistol

Features

  • Comes with a Picaitnny mount. Also comes with ADE all new designed adapter mount for Springfield XD, XDE 3.8XD MOD.2, XD3.3"/3.8" Single Stack, XD(M), Hellcat (Non-OSP) Pistol. (It does NOT fit 5.25″ XDM competition series, it does NOT fit any OSP optics ready models)
  • While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
  • Delta RD3-012 Red dot. Top load System, no need to Remove the sight to change the Battery. 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dialing plate, User Manual, Installation screws and Picatinny mounting plate.
  • 1.75" length x1.25" width x1.15" height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A windage and elevation adjustments
  • Two button adjustments. One UP ARROW and one down ARROW to adjust brightness. Press and hold Up Arrow for 3 secs to power on, and hold Down Arrow for 3 secs to power off.

LASERPRO+ARMALASER Laser Kit for Springfield XD, XD Mod.2, XD-M, XD-M Elite...

LASERPRO+ARMALASER Laser Kit for Springfield XD, XD Mod.2, XD-M, XD-M Elite (Compact Sizes - NOT XD-S or XD-E) w/Holster, Touch-Activated ArmaLaser TR35-G Green Laser & 2 Extra Batteries

Features

  • Laser Kit Includes Laser Holster & Touch-Activated ArmaLaser TR35-G Laser Sight & 2 Extra Batteries
  • Touch-Activated Laser Sight available for the Springfield XD, XD Mod.2, XD-M, XD-M Elite (NOT XD-S or XD-E) This laser fits both FULL-SIZE & COMPACT, but holster only fits COMPACT models. View our listings for our FULL-SIZE Kit.
  • Middle finger will always touch the gold-plated touch sensor on the TR Series where the trigger guard ends. NO adapter required - laser sight fits directly onto trigger guard of gun.
  • Arma Lasers are are Ultra-bright Class 3R 635nm
  • 5 YEAR INDUSTRY LEADING WARRANTY only Laser & 1 Year on Holster! Full control over windage (left to right) and elevation (up and down) adjustments.

Ade Advanced Optics Bertrillium RD3-013 Red Dot Reflex Sight + Optic Mounting...

Ade Advanced Optics Bertrillium RD3-013 Red Dot Reflex Sight + Optic Mounting Plate for Springfield XD, MOD.2,XDm,XDS,XDE, Hellcat(Non-OSP) Pistol

Features

  • Comes with a Picaitnny mount. Also comes with ADE all new designed adapter mount for Springfield XD, XDE 3.8XD MOD.2, XD3.3"/3.8" Single Stack, XD(M), Hellcat (Non-OSP) Pistol. (It does NOT fit 5.25″ XDM competition series, it does NOT fit any OSP optics ready models)
  • While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
  • Bertrillium RD3-013 Red Dot. New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included)
  • 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision
  • Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo. Promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast.

Techna Clip – Springfield Armory MOD.2 or XD(M) .9MM .40 .45 - Conceal Carry Belt...

Techna Clip – Springfield Armory MOD.2 or XD(M) .9MM .40 .45 - Conceal Carry Belt Clip (Right-Side)

Features

  • Why buy a Techna Clip? Our unique Concealment System helps you eliminate the bulk, printing, and discomfort of your daily conceal-carry sidearm. Techna Clip is a Minimalist Holster Solution for those who conceal carry.
  • Included: Fully milled tapped and threaded replacement Slide Cover Plate, Tempered Belt Clip made from High Carbon Spring Steel plated with Black Teflon Stone Coat 5100, 2 screws (1 extra), 2 locking washers (1 extra), 1 Allen wrench.
  • Fast and Simple Install with NO gunsmithing required. Installs on the right side of the slide. Compatible with all Springfield MOD.2 and XD(M) .9MM .40 .45 models. Not compatible with XD and XD-S models.
  • Features: Extra Wide – Tempered Durable Belt Clip to keep your gun secure and in place. Patent pending Grip Serrations along the side of the clip that aid in gripping, Black Stone Coat 5100 Teflon plating to give a protective buffer between the clip and the sidearm.
  • Backed by Money Back Guarantee, Lifetime Warranty, and amazing Customer Service. - Over 130,000 Techna Clips SOLD to Military Personnel, Law Enforcement, and Civilians worldwide.

HQDA Double Magazine Holster, 9mm .40 Double Magazine Pouch Fits Glock 17 19 23 43...

HQDA Double Magazine Holster, 9mm .40 Double Magazine Pouch Fits Glock 17 19 23 43 Duty Belt OWB Double Stack Mag. Holder for Taurus CZ S&W Sig Sauer Beretta H&K Colt Browning Ruger CANIK

Features

  • DOUBLE MAGAZINE HOLSTER:Universal double mags holster fit most 9mm/.40 Caliber magazine of pistol (handgun), such as Glock 17 19 19x 22 23 25 26 27 31 32 33 34 35 37 38 39 45(Gen1-5); Beretta 92-fs 96 PX4 M9A3; H&K VP9 P30; S&W M&P 40,59, 69; Sig Sauer P226 P229 P250 MK25; Taurus 24 7 92 100 PT909 PT800 TH9; CZ P-09 75 P07 SP-01 P-10C; Colt 2000 9mm; Ruger SR9; Walther P88; EAA Witness; Kel-Tec P11; HS Springfield XD; Browning; Steyr; Magnum; CANIK and more(please check our product description).
  • RETENTION ADJUSTMENT: The mag case's inner size of the magazine pouch is adjustable as your needs. Tighten or loosen the built-in screw with Allen Wrench to change the tension of rubber. By two side clips and adjust the pressure of rubber suitable for all magazine which size in this range (width from 1.291'' to 1.370'' and thick from 0.787'' to 0.905'').
  • ADJUSTABLE ANGLE: Easily rotate your belt angle by Allen Wrench (±30°adjustable). It means you can set the double magazine holder from 0° to 60° to fit a comfortable position. And removing two screws on the belt clip with Allen Wrench, belt clip can be replaced by other carry ways in our shop.
  • SUITABLE OCCASION: The belt buckle fits 1.5" to 2.0" width and less than 0.26'' thick duty belt. You can easily wear the double mag pouch on your belt and remove it any time.
  • DURABLE MATERIAL: Made from superior polymer, Comfort, stability, and have good heat, scratch resistance. Maintenance easy, it only needs soap and water for cleaning. It had passed high, low-temperature test, spry salt test, floor drop test, and pull off the force. So can be widely used in daily life, police, tactical area, and other harmful environments. We offer a 30-day money back and 12-month warranty (100% replace a new one). Any questions free to "Contact seller" to get help in 12 hours.

Share The Review

Follow Us

Newsletter